Every guitarist should have all the relevant appliances that will guarantee the best sound quality. Among the items that you need in addition to your guitar are speakers, amplifiers, voltage, amp, and a guitar amp kit. Most people find pleasure in cranking up their amplifiers, but you need to ensure that you have a vintage amp that is incorporated with a master volume control. In case you have a power amplifier that lacks master volume control, you need to consider investing in an amp headphone attenuator. An attenuator should be connected between the amplifier and the speaker cabinet. Today, many amp manufacturers ensure that the amplifiers are fitted with an attenuator for convenience.
The main reason why you need an amp attenuator is to cramp up your amplifier with minimal noise production. It works by replicating the ohm load of your guitar speaker. Most amp headphone attenuators rely on a coil to reduce the wattage by changing the excess wattage into heat. Noise levels are usually reduced because of the wattage that reaches the speakers from the attenuator is significantly reduced. As a guitarist, you need to have an attenuator to enjoy quality sounds with minimal noise.
No doubt, most guitarists find it difficult to connect their attenuators with the speaker. Start by connecting the speaker cable from the amp’s speaker output to the attenuator’s input. After that, you will need to connect the speaker cable from eth attenuator’s output to the input jack of the speaker cabinet. Why should on use an attenuator? One of the crucial reasons why you need to use an attenuator is to produce absolute tone out of your amp. Also, you will not have to worry about a rise in volume even if you crank up your amp. In this website, you will learn more about why you should use an amp attenuator.
It is clear that an attenuator is a useful device for every guitarist, but only if you invest in the right one. In the market, you will find many attenuators, and choose the right one requires one to consider certain important factors. First and foremost, you will have to decide on the type of attenuator you need. The two types of attenuators available in the market today are active and passive. The biggest difference between the two types is that an active attenuator requires an external power supply, while a passive attenuator does not need a power connection.
Also, you need to establish the impedance rating of the attenuator you intend to buy. The impedance rating of the attenuator should be perfect for your speaker cabinet. Power output rating is also an important consideration when buying an attenuator. From the above discussion, it is evident that the use of an attenuator is crucial in achieving a high volume tube tone without being too loud.